To set up additional cameras on your account:
Make sure you are completely logged out of the iSecurity+ app
Put the camera into set up mode ( light should be flashing green and orange on the camera itself)
Go to the WiFi Settings Menu of your actual phone, find the camera name there and connect to the camera
On the iSecurity app when you open it you should see a pop up message detecting the camera and asking you if you would like to set up, you will click yes and go through the set up. Do not not login, you will login in a later step in the set up ( as pictured in the screenshots below).
1. Continue to follow prompts in the set-up wizard
2. During the setup wizard, after you enter your router password and the camera successfully connects to your router, you will be asked to create an account or use an existing one. Select "Use Existing" and enter your existing iSecurity+ username and password on the following page.
Make sure you finish the prompts in the set-up wizard. Once the set-up prompt tells you that you have successfully set up your camera, you will need to log in one more time. If you don't log in that final time, the camera will not finish setup.
**You will need to log out every time you want to add another camera to the account**